Mesh for the hood

Since this product "takes" the full impact, therefore, if left improperly, it becomes unusable and needs to be replaced. The service life of the mesh depends on the intensity of use, the quality of the product and the material from which it is made.

It is made of aluminum or stainless steel, which has a high degree of corrosion protection. The product must also be resistant to high temperatures. This allows you to increase its resource. There are many requirements for this element, so it is worth choosing it responsibly.

The scope of application of the exhaust grid

The metal mesh for the hood is installed inside the kitchen exhaust duct or device. It is usually located inside the exhaust housing in front of a fan or ventilation duct. The location of the grid may vary depending on the design of the equipment.

Features of the selection of the mesh for the hood

The size of the device must be taken into account. The grid must be selected exactly according to the output of the hood. If it is larger or smaller, it will not provide the necessary tightness. As a result, “excess” air will pass through and pollute the system. The sizes and shapes of the cells also matter. They should not be too big or too small. There are special standards and they must be followed.

Most grid grids are equipped with a filter that does not allow drops of fat to pass through and does not allow soot to settle on the surface.

Ease of care and use are not the last place. The material should be well washed and cleaned with special tools. It is also worth paying attention when choosing a grid and the way it is attached. It should be easy to remove and install back. The shape of the grid is selected strictly in accordance with the hood.

Where can I buy a strainer for a hood in Belarus?

You can purchase a filter mesh for the hood in our company by ordering its manufacture for any equipment. The efficiency and quality of the exhaust system will largely depend on the quality of the mesh.

We have been engaged in the sale and custom manufacture of wire mesh products for many years. We use only high-quality, selected galvanized steel as raw materials. Thanks to this, the mesh for the hood of our production is able to last for more than a dozen years.

The price of the products is affordable and low.

We produce grids for any size and for all types of equipment. There is no impossible task for us. You can verify this for yourself if you leave a request for an order.

To do this, you should contact a specialist of our company in any convenient way, discuss all the details and inform the features of the hood (size, purpose, where it is installed, etc.). After clarifying all the details, our employee will name the exact cost of the finished product and tell you about the terms of readiness.

The products are delivered throughout Belarus within 2-5 days.